...
then a stream from RTMP encoder will be video only stream on WCS even if it si published as video+audio stream by a client.
Since build 5.2.1487 a custom file name may be set
Code Block | ||
---|---|---|
| ||
flash_handler_publish_sdp_filename=flash_handler_publish.sdp |
The file should be placed to /usr/local/FlashphonerWebCallServer/conf
folder
flash_handler_play.sdp
The settings file flash_handler_play.sdp describes SDP for streams played on a Flash client. By default, the file contains the following SDP configuration:
Code Block | ||
---|---|---|
| ||
v=0 o=- 1988962254 1988962254 IN IP4 0.0.0.0 c=IN IP4 0.0.0.0 t=0 0 a=sdplang:en m=video 0 RTP/AVP 96 a=rtpmap:96 H264/90000 a=fmtp:96 profile-level-id=42e01f;packetization-mode=1 a=recvonly m=audio 0 RTP/AVP 97 8 0 102 103 104 105 106 107 108 109 110 a=rtpmap:97 SPEEX/16000 a=rtpmap:8 PCMA/8000 a=rtpmap:0 PCMU/8000 a=rtpmap:102 mpeg4-generic/48000/1 a=rtpmap:103 mpeg4-generic/44100/1 a=rtpmap:104 mpeg4-generic/32000/1 a=rtpmap:105 mpeg4-generic/24000/1 a=rtpmap:106 mpeg4-generic/22050/1 a=rtpmap:107 mpeg4-generic/16000/1 a=rtpmap:108 mpeg4-generic/12000/1 a=rtpmap:109 mpeg4-generic/11025/1 a=rtpmap:110 mpeg4-generic/8000/1 a=recvonly |
Since build 5.2.1487 a custom file name may be set
Code Block | ||
---|---|---|
| ||
flash_handler_play_sdp_filename=flash_handler_play.sdp |
The file should be placed to /usr/local/FlashphonerWebCallServer/conf
folder
media_transponder.sdp
The settings file media_transponder.sdp dewscribes SDP for republishing of streams via RTMP on a third-party server. By default, the file contains the following SDP configuration:
Code Block | ||
---|---|---|
| ||
v=0 o=- 1988962254 1988962254 IN IP4 0.0.0.0 c=IN IP4 0.0.0.0 t=0 0 a=sdplang:en m=video 0 RTP/AVP 95 96 a=rtpmap:95 H264/90000 a=fmtp:95 profile-level-id=42e01f;packetization-mode=0 a=rtpmap:96 H264/90000 a=fmtp:96 profile-level-id=42e01f;packetization-mode=1 a=recvonly m=audio 0 RTP/AVP 103 96 97 98 99 100 102 108 104 a=rtpmap:108 mpeg4-generic/48000/1 a=rtpmap:96 mpeg4-generic/8000/1 a=rtpmap:97 mpeg4-generic/11025/1 a=rtpmap:98 mpeg4-generic/12000/1 a=rtpmap:99 mpeg4-generic/16000/1 a=rtpmap:100 mpeg4-generic/22050/1 a=rtpmap:104 mpeg4-generic/24000/1 a=rtpmap:102 mpeg4-generic/32000/1 a=rtpmap:103 mpeg4-generic/44100/1 a=recvonly |
Since build 5.2.1487 a custom file name may be set
Code Block | ||
---|---|---|
| ||
media_transponder_sdp_filename=media_transponder.sdp |
The file should be placed to /usr/local/FlashphonerWebCallServer/conf
folder
rtmp_agent.sdp
The settings file rtmp_agent.sdp describes SDP to capture streams via RTMP from a third-party server. By default, the file contains the following SDP configuration:
Code Block | ||
---|---|---|
| ||
v=0 o=- 1988962254 1988962254 IN IP4 0.0.0.0 c=IN IP4 0.0.0.0 t=0 0 a=sdplang:en m=video 0 RTP/AVP 95 a=rtpmap:95 H264/90000 a=fmtp:95 profile-level-id=42e01f;packetization-mode=1 a=sendonly m=audio 0 RTP/AVP 103 96 97 98 99 100 102 108 104 a=rtpmap:108 mpeg4-generic/48000/2 a=rtpmap:96 mpeg4-generic/8000/2 a=rtpmap:97 mpeg4-generic/11025/2 a=rtpmap:98 mpeg4-generic/12000/2 a=rtpmap:99 mpeg4-generic/16000/2 a=rtpmap:100 mpeg4-generic/22050/2 a=rtpmap:104 mpeg4-generic/24000/2 a=rtpmap:102 mpeg4-generic/32000/2 a=rtpmap:103 mpeg4-generic/44100/2 a=recvonly |
Since build 5.2.1487 a custom file name may be set
Code Block | ||
---|---|---|
| ||
rtmp_agent_sdp_filename=rtmp_agent.sdp |
The file should be placed to /usr/local/FlashphonerWebCallServer/conf
folder
rtsp_server.sdp
The file rtsp_server.sdp describes SDP used to playback streams published on WCS server as RTSP. By default, the file contains the following SDP configuration:
...
192.168.1.5 is WCS server IP address defined in flashphoner.properties file
Since build 5.2.1487 a custom file name may be set
Code Block | ||
---|---|---|
| ||
rtsp_server_sdp_filename=rtsp_server.sdp |
The file should be placed to /usr/local/FlashphonerWebCallServer/conf
folder
hls.sdp
Since build 5.2.575, the file hls.sdp describes SDP used to playback HLS streams. By default, the file contains the following SDP configuration:
...
Note that audio sample rates lower than 32000 Hz are not sypported yet
Since build 5.2.1487 a custom file name may be set
Code Block | ||
---|---|---|
| ||
hls_sdp_filename=hls.sdp |
The file should be placed to /usr/local/FlashphonerWebCallServer/conf
folder
mse.sdp
Since build 5.2.758 the file mse.sdp describes SDP settings for MSE stream playback. By default, the following settings are used:
Code Block | ||
---|---|---|
| ||
v=0 o=- 1988962254 1988962254 IN IP4 0.0.0.0 c=IN IP4 0.0.0.0 t=0 0 a=sdplang:en m=video 0 RTP/AVP 112 a=rtpmap:112 H264/90000 a=fmtp:112 packetization-mode=1; profile-level-id=420020 a=recvonly m=audio 0 RTP/AVP 108 96 97 98 99 100 102 103 104 a=rtpmap:108 mpeg4-generic/48000/1 a=rtpmap:96 mpeg4-generic/8000/1 a=rtpmap:97 mpeg4-generic/11025/1 a=rtpmap:98 mpeg4-generic/12000/1 a=rtpmap:99 mpeg4-generic/16000/1 a=rtpmap:100 mpeg4-generic/22050/1 a=rtpmap:104 mpeg4-generic/24000/1 a=rtpmap:102 mpeg4-generic/32000/1 a=rtpmap:103 mpeg4-generic/44100/1 a=recvonly |
Since build 5.2.1487 a custom file name may be set
Code Block | ||
---|---|---|
| ||
mse_sdp_filename=mse.sdp |
The file should be placed to /usr/local/FlashphonerWebCallServer/conf
folder
mpegts_agent.sdp
Since build 5.2.1214 the file mpegts_agent.sdp describes SDP settings for MPEG-TS stream publishing. By default, the following settings are used:
Code Block | ||
---|---|---|
| ||
v=0 o=- 1988962254 1988962254 IN IP4 0.0.0.0 c=IN IP4 0.0.0.0 t=0 0 a=sdplang:en m=audio 10 RTP/AVP 103 96 97 98 99 100 102 108 104 a=rtpmap:108 mpeg4-generic/48000/2 a=rtpmap:96 mpeg4-generic/8000/2 a=rtpmap:97 mpeg4-generic/11025/2 a=rtpmap:98 mpeg4-generic/12000/2 a=rtpmap:99 mpeg4-generic/16000/2 a=rtpmap:100 mpeg4-generic/22050/2 a=rtpmap:104 mpeg4-generic/24000/2 a=rtpmap:102 mpeg4-generic/32000/2 a=rtpmap:103 mpeg4-generic/44100/2 a=sendonly m=video 10 RTP/AVP 11995 a=rtpmap:11995 H264/90000 a=fmtp:95 profile-level-id=42e01f;packetization-mode=1 a=sendonly |
Since build 5.2.1487 a custom file name may be set
Code Block | ||
---|---|---|
| ||
mpegts_agent_sdp_filename=mpegts_agent.sdp |
The file should be placed to /usr/local/FlashphonerWebCallServer/conf
folder
Audio stream channels number configuration
...