Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

then a stream from RTMP encoder will be video only stream on WCS even if it si published as video+audio stream by a client.

Since build 5.2.1487 a custom file name may be set

Code Block
themeRDark
flash_handler_publish_sdp_filename=flash_handler_publish.sdp

The file should be placed to /usr/local/FlashphonerWebCallServer/conf folder

flash_handler_play.sdp

The settings file flash_handler_play.sdp describes SDP for streams played on a Flash client. By default, the file contains the following SDP configuration:

Code Block
themeRDark
v=0
o=- 1988962254 1988962254 IN IP4 0.0.0.0
c=IN IP4 0.0.0.0
t=0 0
a=sdplang:en
m=video 0 RTP/AVP 96
a=rtpmap:96 H264/90000
a=fmtp:96 profile-level-id=42e01f;packetization-mode=1
a=recvonly
m=audio 0 RTP/AVP 97 8 0 102 103 104 105 106 107 108 109 110
a=rtpmap:97 SPEEX/16000
a=rtpmap:8 PCMA/8000
a=rtpmap:0 PCMU/8000
a=rtpmap:102 mpeg4-generic/48000/1
a=rtpmap:103 mpeg4-generic/44100/1
a=rtpmap:104 mpeg4-generic/32000/1
a=rtpmap:105 mpeg4-generic/24000/1
a=rtpmap:106 mpeg4-generic/22050/1
a=rtpmap:107 mpeg4-generic/16000/1
a=rtpmap:108 mpeg4-generic/12000/1
a=rtpmap:109 mpeg4-generic/11025/1
a=rtpmap:110 mpeg4-generic/8000/1
a=recvonly

Since build 5.2.1487 a custom file name may be set

Code Block
themeRDark
flash_handler_play_sdp_filename=flash_handler_play.sdp

The file should be placed to /usr/local/FlashphonerWebCallServer/conf folder

media_transponder.sdp

The settings file media_transponder.sdp dewscribes SDP for republishing of streams via RTMP on a third-party server. By default, the file contains the following SDP configuration:

Code Block
themeRDark
v=0
o=- 1988962254 1988962254 IN IP4 0.0.0.0
c=IN IP4 0.0.0.0
t=0 0
a=sdplang:en
m=video 0 RTP/AVP 95 96
a=rtpmap:95 H264/90000
a=fmtp:95 profile-level-id=42e01f;packetization-mode=0
a=rtpmap:96 H264/90000
a=fmtp:96 profile-level-id=42e01f;packetization-mode=1
a=recvonly
m=audio 0 RTP/AVP 103 96 97 98 99 100 102 108 104
a=rtpmap:108 mpeg4-generic/48000/1
a=rtpmap:96 mpeg4-generic/8000/1
a=rtpmap:97 mpeg4-generic/11025/1
a=rtpmap:98 mpeg4-generic/12000/1
a=rtpmap:99 mpeg4-generic/16000/1
a=rtpmap:100 mpeg4-generic/22050/1
a=rtpmap:104 mpeg4-generic/24000/1
a=rtpmap:102 mpeg4-generic/32000/1
a=rtpmap:103 mpeg4-generic/44100/1
a=recvonly

Since build 5.2.1487 a custom file name may be set

Code Block
themeRDark
media_transponder_sdp_filename=media_transponder.sdp

The file should be placed to /usr/local/FlashphonerWebCallServer/conf folder

rtmp_agent.sdp

The settings file rtmp_agent.sdp describes SDP to capture streams via RTMP from a third-party server. By default, the file contains the following SDP configuration:

Code Block
themeRDark
v=0
o=- 1988962254 1988962254 IN IP4 0.0.0.0
c=IN IP4 0.0.0.0
t=0 0
a=sdplang:en
m=video 0 RTP/AVP 95
a=rtpmap:95 H264/90000
a=fmtp:95 profile-level-id=42e01f;packetization-mode=1
a=sendonly
m=audio 0 RTP/AVP 103 96 97 98 99 100 102 108 104
a=rtpmap:108 mpeg4-generic/48000/2
a=rtpmap:96 mpeg4-generic/8000/2
a=rtpmap:97 mpeg4-generic/11025/2
a=rtpmap:98 mpeg4-generic/12000/2
a=rtpmap:99 mpeg4-generic/16000/2
a=rtpmap:100 mpeg4-generic/22050/2
a=rtpmap:104 mpeg4-generic/24000/2
a=rtpmap:102 mpeg4-generic/32000/2
a=rtpmap:103 mpeg4-generic/44100/2
a=recvonly

Since build 5.2.1487 a custom file name may be set

Code Block
themeRDark
rtmp_agent_sdp_filename=rtmp_agent.sdp

The file should be placed to /usr/local/FlashphonerWebCallServer/conf folder

rtsp_server.sdp

The file rtsp_server.sdp describes SDP used to playback streams published on WCS server as RTSP. By default, the file contains the following SDP configuration:

...

192.168.1.5 is WCS server IP address defined in flashphoner.properties file

Since build 5.2.1487 a custom file name may be set

Code Block
themeRDark
rtsp_server_sdp_filename=rtsp_server.sdp

The file should be placed to /usr/local/FlashphonerWebCallServer/conf folder

hls.sdp

Since build 5.2.575, the file hls.sdp describes SDP used to playback HLS streams. By default, the file contains the following SDP configuration:

...

Note that audio sample rates lower than 32000 Hz are not sypported yet

Since build 5.2.1487 a custom file name may be set

Code Block
themeRDark
hls_sdp_filename=hls.sdp

The file should be placed to /usr/local/FlashphonerWebCallServer/conf folder

mse.sdp

Since build 5.2.758 the file mse.sdp describes SDP settings for MSE stream playback. By default, the following settings are used:

Code Block
themeRDark
v=0
o=- 1988962254 1988962254 IN IP4 0.0.0.0
c=IN IP4 0.0.0.0
t=0 0
a=sdplang:en
m=video 0 RTP/AVP 112
a=rtpmap:112 H264/90000
a=fmtp:112 packetization-mode=1; profile-level-id=420020
a=recvonly
m=audio 0 RTP/AVP 108 96 97 98 99 100 102 103 104
a=rtpmap:108 mpeg4-generic/48000/1
a=rtpmap:96 mpeg4-generic/8000/1
a=rtpmap:97 mpeg4-generic/11025/1
a=rtpmap:98 mpeg4-generic/12000/1
a=rtpmap:99 mpeg4-generic/16000/1
a=rtpmap:100 mpeg4-generic/22050/1
a=rtpmap:104 mpeg4-generic/24000/1
a=rtpmap:102 mpeg4-generic/32000/1
a=rtpmap:103 mpeg4-generic/44100/1
a=recvonly

Since build 5.2.1487 a custom file name may be set

Code Block
themeRDark
mse_sdp_filename=mse.sdp

The file should be placed to /usr/local/FlashphonerWebCallServer/conf folder

mpegts_agent.sdp

Since build 5.2.1214  the file mpegts_agent.sdp describes SDP settings for MPEG-TS stream publishing. By default, the following settings are used:

Code Block
themeRDark
v=0
o=- 1988962254 1988962254 IN IP4 0.0.0.0
c=IN IP4 0.0.0.0
t=0 0
a=sdplang:en
m=audio 10 RTP/AVP 103 96 97 98 99 100 102 108 104
a=rtpmap:108 mpeg4-generic/48000/2
a=rtpmap:96 mpeg4-generic/8000/2
a=rtpmap:97 mpeg4-generic/11025/2
a=rtpmap:98 mpeg4-generic/12000/2
a=rtpmap:99 mpeg4-generic/16000/2
a=rtpmap:100 mpeg4-generic/22050/2
a=rtpmap:104 mpeg4-generic/24000/2
a=rtpmap:102 mpeg4-generic/32000/2
a=rtpmap:103 mpeg4-generic/44100/2
a=sendonly
m=video 10 RTP/AVP 11995
a=rtpmap:11995 H264/90000
a=fmtp:95 profile-level-id=42e01f;packetization-mode=1
a=sendonly

Since build 5.2.1487 a custom file name may be set

Code Block
themeRDark
mpegts_agent_sdp_filename=mpegts_agent.sdp

The file should be placed to /usr/local/FlashphonerWebCallServer/conf folder

Audio stream channels number configuration

...