WCS server to backend server connection setup

To enable metric values sending to backend server, the following parameter in flashphoner.propetries file should be set

stats=true

To configure WCS to backend server connection, the following parameters in flashphoner.propetries file should be set

wcsoam_ip=192.168.1.5
wcsoam_port=7777
wcsoam_sha_salt=123456789

Where

• wcsoam_ip - backend server address
• wcsoam_port - backend server port (7777 by default)
• wcsoam_sha_salt - authentication key (should be the same as in backend server settings)

Tuning of WCS interaction with backend server

A metric values to send to backend server are written to ring buffer in memory. This buffer size is set in kilobytes with the following poarameter

wcsoam_buffer_size=20000

A data are sent to backend server in chunks, the chunk size is 64 kilobytes by default and can be changes with the following parameter

wcsoam_chunk_size=64

Backend server connection tries interval is set in milliseconds with the following parameter

wcsoam_reconnect_interval=5000