Server default settings are mostly universal and need to be tuned to certain client case.

REST client tuning

When REST hooks are used, on every WCS server action (establishing client connection, publishing and playing a stream, making a SIP call etc) HTTP REST connection to backend server is established. With a large number of simultaneously publishing clients or subscribers, with the default WCS settings it is possible to exhaust the WCS REST client thread pool, that is lead to deadlocks. Then, server stops to publish and play streams.

By default, a maximum number of simultaneous REST connections is set to 200 with the following parameter in flashphoner.properties file

rest_max_connections=200

To escape thred poolexhausting and deadlocks this value should be reduced, for example

rest_max_connections=20

If REST hooks are not used, REST client can be disabled with the following parameter

disable_rest_requests=true

Excessive logging supression

When REST hooks are used, REST client operations, EchoApp default backend operations and REST API server operations are written to WCS core logs. That leads to large number of entries in the log file and, therefore, inceases the server load. The excessive logging may be decreased if necessary using the following parameters in log4j.properties file:

log4j.logger.RestClient=WARN
log4j.logger.EchoApp=WARN
log4j.logger.RestApiRouter=WARN

UDP tuning

Streaming mediadata are transferred with UDP packets. Those packets can be dropped, for example if server does not have enough time to parse packet queue, that leads to picture quality loss and freezes. To escape this it is necessary to tune UDP sockets buffers with the following settings in flashphoner.properties file

rtp_receive_buffer_size=131072
rtp_send_buffer_size =131072

and to tune system queues with command

ip link set txqueuelen 2000 dev eth0

To diagnose UDP problem, it is necessary to track UDP packets dropping with command

dropwatch -l kas
>start

Channel load optimization

Users' playback picture quality depends on bitrate: the higher the bitrate, the higher the quality. However, the higher the bitrate, the higher data transfer channel load and, if the bandwidth between the server and clients is limited, there is a possibility that the channel will be fully loaded. This leads the bitrate dropping and a sharp decline in quality.

In this regard, it is necessary to limit the bitrate to ensure sufficient picture quality with an acceptable channel load.

Publisher bitrate limiting

To reduce the load to the channel from publisher to server, maximum and minimum bitrate values in kbps may be set in publisher script with JavaScript API

session.createStream({
    name: streamName,
    display: localVideo,
    constraints: {
        video: {
            minBitrate: 500
            maxBitrate: 1000
        }
    }
    ...
}).publish();

Server bitrate limiting

Minimum and maximum bitrate values in bps on server may be set with the following parameters in flashphoner.properties file

webrtc_cc_min_bitrate=500000
webrtc_cc_max_bitrate=1000000

To exclude fast bitrate rise bu=y browser, the following parameter should be set

webrtc_cc2_twcc=false

Stream decoding on demand only must be switched on to reduce server load:

streaming_video_decoder_fast_start=false

Changing dynamic ports range in Linux

Dynamic or ephemeral port is a temporary port that is opened when establishing IP-connection from certain range of TCP/IP stack. Many Linux kernel versions use ports range 32768 — 61000 as dymanic ports. Enter the following command to check what range is used on server

sysctl net.ipv4.ip_local_port_range

If this range overlaps with WCS standard ports, it should be changed with the following command

sysctl -w net.ipv4.ip_local_port_range="59999 63000"

Adjusting the maximum number of opened files

In the launch script webcallserver that is in subfolder bin in WCS home folder, for example

/usr/local/FlashphonerWebCallServer/bin/webcallserver

in start() function the maximum number of opened files is set

function start() {
 ...
 echo -n $"$PRODUCT: starting"

 ulimit -n 20000    
 if [[ "$1" == "standalone" ]]; then
     ...
 fi
 ...
}

By default, this value is set to 20000, but it may be increased if necessary, following the limitations of the operating system used.