SDP settings are specified in WCS core source code by default. To change defaults, the following files should be created in /usr/local/FlashphonerWebCallServer/conf directory.
WCS srever restart required after the settings are changed.
flash_handler_publish.sdp
The settings file flash_handler_publish.sdp describes SDP for streams published from a Flash client. By default, the file contains the following SDP configuration:
v=0 o=- 1988962254 1988962254 IN IP4 0.0.0.0 c=IN IP4 0.0.0.0 t=0 0 a=sdplang:en m=video 0 RTP/AVP 96 a=rtpmap:96 H264/90000 a=fmtp:96 profile-level-id=42e01f;packetization-mode=1 a=sendonly m=audio 0 RTP/AVP 97 8 0 a=rtpmap:97 SPEEX/16000 a=rtpmap:8 PCMA/8000 a=rtpmap:0 PCMU/8000 a=sendonly
Note that changing this file allows to add or remove audio and video streams support only, but not to change codec used by puslisher.
flash_handler_play.sdp
The settings file flash_handler_play.sdp describes SDP for streams played on a Flash client. By default, the file contains the following SDP configuration:
v=0 o=- 1988962254 1988962254 IN IP4 0.0.0.0 c=IN IP4 0.0.0.0 t=0 0 a=sdplang:en m=video 0 RTP/AVP 96 a=rtpmap:96 H264/90000 a=fmtp:96 profile-level-id=42e01f;packetization-mode=1 a=recvonly m=audio 0 RTP/AVP 97 8 0 108 96 109 98 99 100 102 103 104 a=rtpmap:97 SPEEX/16000 a=rtpmap:8 PCMA/8000 a=rtpmap:0 PCMU/8000 a=rtpmap:108 mpeg4-generic/48000/1 a=rtpmap:96 mpeg4-generic/8000/1 a=rtpmap:109 mpeg4-generic/11025/1 a=rtpmap:98 mpeg4-generic/12000/1 a=rtpmap:99 mpeg4-generic/16000/1 a=rtpmap:100 mpeg4-generic/22050/1 a=rtpmap:104 mpeg4-generic/24000/1 a=rtpmap:102 mpeg4-generic/32000/1 a=rtpmap:103 mpeg4-generic/44100/1 a=recvonly
media_transponder.sdp
The settings file media_transponder.sdp dewscribes SDP for republishing of streams via RTMP on a third-party server. By default, the file contains the following SDP configuration:
v=0 o=- 1988962254 1988962254 IN IP4 0.0.0.0 c=IN IP4 0.0.0.0 t=0 0 a=sdplang:en m=video 0 RTP/AVP 95 96 a=rtpmap:95 H264/90000 a=fmtp:95 profile-level-id=42e01f;packetization-mode=0 a=rtpmap:96 H264/90000 a=fmtp:96 profile-level-id=42e01f;packetization-mode=1 a=recvonly m=audio 0 RTP/AVP 103 96 97 98 99 100 102 108 104 a=rtpmap:108 mpeg4-generic/48000/1 a=rtpmap:96 mpeg4-generic/8000/1 a=rtpmap:97 mpeg4-generic/11025/1 a=rtpmap:98 mpeg4-generic/12000/1 a=rtpmap:99 mpeg4-generic/16000/1 a=rtpmap:100 mpeg4-generic/22050/1 a=rtpmap:104 mpeg4-generic/24000/1 a=rtpmap:102 mpeg4-generic/32000/1 a=rtpmap:103 mpeg4-generic/44100/1 a=recvonly
rtmp_agent.sdp
The settings file rtmp_agent.sdp describes SDP to capture streams via RTMP from a third-party server. By default, the file contains the following SDP configuration:
v=0 o=- 1988962254 1988962254 IN IP4 0.0.0.0 c=IN IP4 0.0.0.0 t=0 0 a=sdplang:en m=video 0 RTP/AVP 95 a=rtpmap:95 H264/90000 a=fmtp:95 profile-level-id=42e01f;packetization-mode=1 a=sendonly m=audio 0 RTP/AVP 103 96 97 98 99 100 102 108 104 a=rtpmap:108 mpeg4-generic/48000/1 a=rtpmap:96 mpeg4-generic/8000/1 a=rtpmap:97 mpeg4-generic/11025/1 a=rtpmap:98 mpeg4-generic/12000/1 a=rtpmap:99 mpeg4-generic/16000/1 a=rtpmap:100 mpeg4-generic/22050/1 a=rtpmap:104 mpeg4-generic/24000/1 a=rtpmap:102 mpeg4-generic/32000/1 a=rtpmap:103 mpeg4-generic/44100/1 a=recvonly
rtsp_server.sdp
The file rtsp_server.sdp describes SDP used to playback streams pub;lished on WCS server as RTSP. By default, the file contains the following SDP configuration:
v=0 o=- 1988962254 1988962254 IN IP4 192.168.1.5 c=IN IP4 192.168.1.5 t=0 0 a=sdplang:en a=range:npt=now- a=control:* m=audio 0 RTP/AVP 96 a=rtpmap:96 mpeg4-generic/48000/2 a=fmtp:96 profile-level-id=1;mode=AAC-hbr;sizelength=13;indexlength=3;indexDeltaLength=3 a=control:audio m=video 0 RTP/AVP 119 a=rtpmap:119 H264/90000 a=fmtp:119 packetization-mode=1;profile-level-id=42e01f; a=control:video
Where
192.168.1.5 is WCS server IP address defined in flashphoner.properties file