Skip to end of metadata
Go to start of metadata

RTP stream

The traffic floes beetween WCS and the SIP server. You can find it in the RTP traffic dump by IP addresses (IP addresses of browser, WCS server and SIP server are known to us).

In this specific case RTP traffic is represented by streams with SSRC 0x5C and 0x44.

SIP call traffic analysis

The following diagram shows how SIP and RTP traffic of one SIP call flows.

From the analysis of the SIP call we can see that WCS receives and sends RTP audio streams with audio data encoded by Opus.

Possible problems

In most cases problems are related to RTP traffic not flowing between WCS and the SIP server.

Troubleshooting

Make sure the RTP traffic is unhindered and can flow from the WCS server and back. The default media ports of the WCS server [31000-32000] should be open to receive the incoming UDP traffic. If the WCS server is behind NAT and has an external IP address, make sure UDP packets sent to this external address are correctly routed to the corresponding ports of the WCS server behind NAT.