Web Call Server 5.2 - EN
Space shortcuts
Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

To configure streaming video load and stress tests you can use WCS server settings. Tests will start after the server startup.

- StreamingLoadTest: the test stream is generated by the WCS server; a preconfigured number of subscribers connect to the stream

- StreamingCustomStreamStressTest: a preconfigured number of subscribers connect to the real stream published on the WCS server

Settings examples

- the StreamingLoadTest test with duration of 10 minutes; no transcoding for five subscribers, transcoding for seven subscribers

streaming_load_test_duration_minutes=10
streaming_load_test_proxy_subscribers=5
streaming_load_test_encoding_subscriber_groups=2,5
start_test=true
streaming_tests=StreamingLoadTest


- the StreamingCustomStreamStressTest test without transcoding for all subscribers; up to sixty subscribers can connect simultaneously

streaming_custom_stream_stress_test_rate=500
streaming_custom_stream_stress_test_subscriber_ttl_sec=30
streaming_custom_stream_stress_test_max_proxy_subscribers=100
streaming_custom_stream_stress_test_encoding_subscriber_groups=0
streaming_custom_stream_stress_test_stream_name=testStreamName
start_test=true
streaming_tests=StreamingCustomStreamStressTest


Here testStreamName - is the name of the stream that must be published on the WCS server (for instance, using one of example clients for stream publishing) in order to run the test.

  • No labels