Table of Contents |
---|
Stream capture of UDP audio and video traffic from dump file
WCS can automatically capture and play stream from the specified file in Pcap format. The file must be formed with tcpdump or any other tool to collect IP packets. This feature is useful primarily for debugging in the development of applicationsю
File name must be set in audioPort-videoPort-name.pcap form, for example
Code Block | ||||
---|---|---|---|---|
| ||||
pull_streams=pcap://31070-31072-test.pcap |
where 31070 is audio packets port and 31072 is video packets port.
SDP file must be added to every pcap file. SDP file must be named similarly to pcap file
Code Block | ||||
---|---|---|---|---|
| ||||
31070-31072-test.pcap.sdp |
SDP file example:
Code Block | ||||
---|---|---|---|---|
| ||||
v=0
o=Gateway-0.0.0.666 0 0 IN IP[local_ip_type] [local_ip]
s=-
c=IN IP[local_ip_type] [local_ip]
t=0 0
m=audio 0 RTP/AVP 0 101
a=rtpmap:0 PCMU/8000
a=rtpmap:101 telephone-event/8000
a=sendrecv
m=video 0 RTP/AVP 112
a=rtpmap:112 H264/90000
a=fmtp:112 profile-level-id=42e01f; packetization-mode=1
a=content:main
a=rtcp-fb:* ccm fir
a=rtcp-fb:* nack pli
a=sendrecv |
Dump file and SDP file must be placed to /usr/local/FlashphonerWebCallServer/media directory on server.
RTSP-interleaved stream capture from dump file
For debugging purpose, WCS includes the utility to capture RTSP stream from file obtained by tcpdump or any other IP packets dump collection tool. Then, the stream is published via RTSP, emulating IP camera. In its turn, WSC can capture RTSP stream from this "camera". The feature is useful when RTSP-source itself is not accessible, but there are dump files of stream from that source. The utility works with RTSP iterleaved session files only.
...