...
Parameter | Values available | Description | |
---|---|---|---|
Audio parameters | |||
codec | opus mpeg4-generic speex | Audio codec usedto use | |
rate | 8000 11025 12000 16000 22050 24000 32000 44100 48000 | Audio sample rate, kHz | |
channels | 1 2 | Channels quantity: mono or stereo | Параметры видео|
Video parameters | |||
codec | h264 vp8 | Video codec to use | |
width | Depends on quality required and bandwith available | Picture width | |
height | Depends on quality required and bandwith available | Picture height | |
codeImpl | FF OPENH264 | Video codec used: based on FFmpeg or OpenH.264 | |
gop | Depends on quality required and bandwith available | Key frames frequency (GOP) | |
fps | Depends on quality required and bandwith available | Frames frequency per second |
...
REST query | REST query body example | REST response example | Response states | Description | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
/cdn/stream/show_routes |
|
| 200 – OK 500 – Internal Server Error | Show CDN stream routes |
Parameters
Description | Example | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Stream name (including transcoding profile if necessary) | test-webrtc-144 | ||||||||||||||||
Transcoder stream parameters | |||||||||||||||||
Transcoding profiles used by Transcoder parameters | 2-STREAM1-PROFILE-
| Stream pulled from Origin by Transcoder parameters |
| 220Audio parameters | AUDIO{bitrate=0, codec=
| Video parameters (according to transcoding profiles used) |
| 320
| 180
| FF
| |||||||
Stream parameters that Transcoder can pull from Origin | 3-NEW-TRANSCODER-192.168.1.220 | ||||||||||||||||
Origin stream parameters | |||||||||||||||||
Stream published to Origin parameters | 4-PROXY-192.168.1.219 | ||||||||||||||||
| 200 – OK 500 – Internal Server Error | Show CDN stream routes |
Parameters
Description | Example |
---|---|
Stream name (including transcoding profile if necessary) | test-webrtc-144 |
Transcoding profile requested parameters | |
Profile requested parameters | REQUESTED-PROFILE |
Audio parameters | AUDIO{bitrate=0, codec='opus', rate=48000, channels=2} |
Video parameters | VIDEO{width=0256, height=0144, gop=null, fps=null, bitrate=0, codec='H264h264', codecImpl='OPENH264', quality=null} |
Transcoder stream parameters | |
Transcoding profiles used by Transcoder parameters | 1-PROFILE-192.168.1.220 |
Stream pulled from Origin by Transcoder parameters | 2-STREAM-192.168.1.220 |
Audio parameters | AUDIO{bitrate=0, codec='opus', rate=48000, channels=2} |
Video parameters (according to transcoding profiles used) | VIDEO{width=320, height=180, gop=null, fps=null, bitrate=0, codec='H264', codecImpl='FF', quality=null} |
Stream parameters that Transcoder can pull from Origin | 3-NEW-TRANSCODER-192.168.1.220 |
Origin stream parameters | |
Stream published to Origin parameters | 4-PROXY-192.168.1.219 |
Audio parameters | AUDIO{bitrate=0, codec='opus', rate=48000, channels=2} |
Video parameters | VIDEO{width=0, height=0, gop=null, fps=null, bitrate=0, codec='H264', codecImpl='', quality=null} |
CDN routes checking examples
Let's look how to check some CDN routes for stream playback.
For example we use three nodes CDN:
- 192.168.1.219 - Origin
- 192.168.1.220 - Transcoder
- 192.168.1.221 - Edge
WebRTC H264+opus (48 kHz, stereo) stream named test is published to Origin
Stream pulling from Origin without transcoding if publishing and playback profiles are equal
Stream named test is played on Edge by profile
Code Block | ||||
---|---|---|---|---|
| ||||
-webrtc-opus-video-proxy:
audio:
codec : opus
rate : 48000
channels : 2
video:
codec: h264 |
The response to this query
Code Block | ||||
---|---|---|---|---|
| ||||
http://192.168.1.221:8081/rest-api/cdn/stream/show_routes
{
"streamName": "test-webrtc-opus-video-proxy"
} |
should be interpreted as follows:
1. Profile requested parameters:
Code Block | ||||
---|---|---|---|---|
| ||||
"REQUESTED-PROFILE": [
"AUDIO{bitrate=0, codec='opus', rate=48000, channels=2}",
"VIDEO{width=0, height=0, gop=null, fps=null, bitrate=0, codec='h264', codecImpl='null', quality=null}"
], |
2. Stream is pulled from Origin:
Code Block | ||||
---|---|---|---|---|
| ||||
"1-PROXY-PROFILE-192.168.1.219": [
"AUDIO{bitrate=0, codec='opus', rate=48000, channels=2}",
"VIDEO{width=0, height=0, gop=null, fps=null, bitrate=0, codec='H264', codecImpl='', quality=null}"
], |
3. Stream can be pulled from Transcoder
Code Block | ||||
---|---|---|---|---|
| ||||
"2-NEW-TRANSCODER-192.168.1.220": [], |
4. But is pulled from Origin because stream publishing parameters are equal to requested playback parameters:
Code Block | ||||
---|---|---|---|---|
| ||||
"3-PROXY-192.168.1.219": [
"AUDIO{bitrate=0, codec='opus', rate=48000, channels=2}",
"VIDEO{width=0, height=0, gop=null, fps=null, bitrate=0, codec='H264', codecImpl='', quality=null}"
]
|
Stream pulling from Transcoder with audio transcoding
Stream named test is played on Edge by profile
Code Block | ||||
---|---|---|---|---|
| ||||
-webrtc-pcma-video-proxy:
audio:
codec : pcma
rate : 8000
channels : 1 |
The response to this query
Code Block | ||||
---|---|---|---|---|
| ||||
http://192.168.1.221:8081/rest-api/cdn/stream/show_routes
{
"streamName": "test-webrtc-pcma-video-proxy"
} |
should be interpreted as follows:
1. Profile requested parameters:
Code Block | ||||
---|---|---|---|---|
| ||||
"REQUESTED-PROFILE": [
"AUDIO{bitrate=0, codec='pcma', rate=8000, channels=1}"
], |
2. Transcoding profile is created on Transcoder:
Code Block | ||||
---|---|---|---|---|
| ||||
"1-PROFILE-192.168.1.220": [
"AUDIO{bitrate=0, codec='opus', rate=48000, channels=2}",
"VIDEO{width=0, height=0, gop=null, fps=null, bitrate=0, codec='H264', codecImpl='null', quality=null}",
"AUDIO{bitrate=0, codec='PCMA', rate=8000, channels=1}"
], |
3. Stream is pulled from Transcoder
Code Block | ||||
---|---|---|---|---|
| ||||
"2-STREAM-192.168.1.220": [
"AUDIO{bitrate=0, codec='opus', rate=48000, channels=2}",
"VIDEO{width=0, height=0, gop=null, fps=null, bitrate=0, codec='H264', codecImpl='null', quality=null}",
"AUDIO{bitrate=0, codec='PCMA', rate=8000, channels=1}"
],
"3-NEW-TRANSCODER-192.168.1.220": [], |
4. Stream publishing to Origin parameters:
Code Block | ||||
---|---|---|---|---|
| ||||
"3-PROXY-192.168.1.219": [
"AUDIO{bitrate=0, codec='opus', rate=48000, channels=2}",
"VIDEO{width=0, height=0, gop=null, fps=null, bitrate=0, codec='H264', codecImpl='', quality=null}"
]
|
Stream pulling from Transcoder with video transcoding
Stream named test is played on Edge by profile
Code Block | ||||
---|---|---|---|---|
| ||||
-opus-vp8:
audio:
codec : opus
rate : 48000
channels : 2
video:
width : 320
height : 240
gop : 60
fps : 30
codec : vp8
codecImpl : FF |
The response to this query
Code Block | ||||
---|---|---|---|---|
| ||||
http://192.168.1.221:8081/rest-api/cdn/stream/show_routes
{
"streamName": "test-webrtc-opus-vp8"
} |
should be interpreted as follows:
1. Profile requested parameters:
Code Block | ||||
---|---|---|---|---|
| ||||
"REQUESTED-PROFILE": [
"AUDIO{bitrate=0, codec='opus', rate=48000, channels=2}",
"VIDEO{width=320, height=240, gop=60, fps=30, bitrate=0, codec='vp8', codecImpl='FF', quality=null}"
], |
2. Transcoding profile is created on Transcoder:
Code Block | ||||
---|---|---|---|---|
| ||||
"1-PROFILE-192.168.1.220": [
"AUDIO{bitrate=0, codec='opus', rate=48000, channels=2}",
"VIDEO{width=0, height=0, gop=null, fps=null, bitrate=0, codec='H264', codecImpl='', quality=null}",
"VIDEO{width=320, height=240, gop=60, fps=30, bitrate=0, codec='VP8', codecImpl='FF', quality=null}"
], |
3. Stream is pulled from Transcoder
Code Block | ||||
---|---|---|---|---|
| ||||
"2-STREAM-192.168.1.220": [
"AUDIO{bitrate=0, codec='opus', rate=48000, channels=2}",
"VIDEO{width=0, height=0, gop=null, fps=null, bitrate=0, codec='H264', codecImpl='', quality=null}",
"VIDEO{width=320, height=240, gop=60, fps=30, bitrate=0, codec='VP8', codecImpl='FF', quality=null}"
],
"3-NEW-TRANSCODER-192.168.1.220": [], |
4. Stream publishing to Origin parameters:
Code Block | ||||
---|---|---|---|---|
| ||||
"3-PROXY-192.168.1.219": [
"AUDIO{bitrate=0, codec='opus', rate=48000, channels=2}",
"VIDEO{width=0, height=0, gop=null, fps=null, bitrate=0, codec='H264', codecImpl='', quality=null}"
]
|
Backward compatibility with CDN 2.0
CDN 2.1 backward compatibility with CDN 2.0 is supported in the following cases:
1. Edge 2.0 can pull streams from Origin 2.1
2. Edge 2.1 can pull streams from Origin 2.0
In these cases transcoding works according to codecs and SDP setup as defined for CDN 2.0.