WCS server to backend server connection setup

To enable sending of metric values to backend server, the following parameter in flashphoner.propetries file should be set

stats=true

To configure WCS to backend server connection, the following parameters in flashphoner.propetries file should be set

wcsoam_ip=192.168.1.5
wcsoam_port=7777
wcsoam_sha_salt=123456789

Where

• wcsoam_ip - backend server address
• wcsoam_port - backend server port (7777 by default)
• wcsoam_sha_salt - authentication key (should be the same as in backend server settings)

Tuning of WCS interaction with backend server

Metric values to send to backend server are written to ring buffer in memory. This buffer size is set in kilobytes with the following parameter

wcsoam_buffer_size=20000

Data are sent to backend server in chunks; the chunk size is 64 kilobytes by default and can be changed with the following parameter

wcsoam_chunk_size=64

Backend server connection tries interval is set in milliseconds with the following parameter

wcsoam_reconnect_interval=5000